cs
sk
en
Terms and conditionsContact

Basket

Your basket is empty

You are here: Main page > Linear actuators > Series ID10 - ACME
Lineární aktuátor série ID10

Linear actuator series ID10 - ACME screw

Stroke: 102...610 mm
Load: 1500...3500 N
Speed: 7.4...26.7 mm/s
Voltage: 12 a 24 V

  • Linear actuator with DC motor
  • ACME screw
  • Spure gearbox
  • Preset limit switches
  • Metal gears
  • Setting movement direction by reversing voltage polarity
  • Protection level IP65

Options: stroke length, cable length, input voltage 36 or 48 V, hole diameter in the rod...

Actuator specifications

Ratio 10:1 20:1 40:1
Maximal load 1500 N 2500 N 3500 N
Speed at max. load 26.7 mm/s 14.3 mm/s 7.4 mm/s
Static load 4500 N 4500 N 4500 N
Voltage 12 V 24 V 12 V 24 V 12 V 24 V
Current at rated load 17.6 A 8.8 A 13.2 A 6.6 A 11.0 A 5.5 A

Operating conditions

  • Duty cycle: 25 % (2 min. continuous operation in 8 min.)
  • Operating temperature: -25...+65 °C

Dimensions

Stroke S [mm] 102 153 203 254 305 457 610
Retracted length A [mm] 359 410 460 511 613 765 918
Dimensions of actuator ID10
  • Stroke tolerance ±3.0 mm
  • Cable length 250 mm
Characteristic of actuator ID10 - ACME
 
 
 
Ing. Jiří Gross
Bartolomějská 63, Brno, Czech republic
e-mail: jiri.gross@dcmotory.eu
Copyright © 2019
All rights reserved